Views:

Further Information
See the related articles at the bottom of this page for further information.

Different Visualisation
A terminal may be configured for employees only, employees and equipment or equipment only.  
The resource section in the workbench provides clickable plates for:
 
  • The clocked in Employee
  • Linked Equipment
  • Home (Return to Clock in Screen)
When a user clocks into the workbench with an ID that is related to an employee seat, the employee plate is shown.
 

 
When a user clocks into the workbench with an ID that is related to an employee seat and the terminal has linked equipment, the employee plate and the equipment plate(s) are shown.
 

 
When a user clocks into the workbench with an ID that is related to an equipment seat and the terminal has linked equipment, only the equipment plate(s) are shown.
 

 
The workbench functions differently depending upon whether the equipment is activated for data collection.  The active yes/no setting against the equipment seat record, will determine the functionality available to the user and the level of data that is captured for analytical and tracking purposes.
 
Key differences between data collection for activated resources:
 
Active Behaviour
Employee Active Activities available to support Overall Labour Effectiveness (OLE)
Equipment Active Activities available to support Overall Equipment Effectiveness (OEE)
 
The plates in the resource section provide additional information relating to the resource to help the user quickly identify :
 
  • Current status of the resource
  • Date and time the resource clocked in
  • Current status of the resource
  • Current KPIs of the resource (Availability, Performance, Quality)
  • Overall OLE or OEE KPI of the resource
  • Indicator for new messages
  • Indicator for equipment activation status
The vertical bar to the left of the resource plate, provides a colour coded visualisation of the type of task being performed.  Setup, run, teardown, wait tasks can have different colours applied.
 

To customise task colours:
 
  1. Select Settings
  2. Select Advanced Settings
  3. Definitions
  4. Diversions
  5. Default

Equipment plates include indicators to help identify :
 
  • Manual data collection is enabled
  • Manual data collection is disabled
  • Automation is enabled for data collection
  • The health and state of automation data

The indicators appear in the top right hand corner of the plate.
 

Equipment Activation Status
 
Color/Image Code Meaning  
Finger Manual data collection is enabled

WIFI Grey with Diagonal Line
 
Manual data collection is disabled
 
WIFI Grey
Device is activated for Automation, but no data has been received
 
WIFI Green
Device is activated for Automation and valid data has been received on the accounting day

 
WIFI Red
Device is activated for Automation and unresolved invalid data has been received on the accounting day

 
 
To enable a resource for manual data collection:
 
  1. Select Maintenance
  2. Select the Resource Seat
  3. Select Activate

Refer to the Factory Automation Guide to setup resources for automation.

 
Applies to: LYNQ 2019, LYNQ 2020

Related Articles (2)

Workbench button section Workbench job list section